Handmade Bits

Myler USA Bit -  Style: #5 Mouthpiece: Slow Twist Hinge Port with Copper Roller Shank: 7 1/2" Measurements are Approximate

   Maker: David Felton    Mouthpiece: Mule    Shank: 8"    Measurements are Approximate 

   Maker: David Felton    Mouthpiece: Twisted Wire Snaffle    Shank: 8"    Measurements are Approximate 

   Maker: David Felton    Mouthpiece: High, Flat Port with Brass Roller    Shank: 8"    Measurements are Approximate 

Flaharty Bits and Spurs Cheek:  D-Ring Mouthpiece: Square Center Chain

Flaharty Bits and Spurs Shank:  Circle Gag  - 8.5" Mouthpiece: Smooth Snaffle

Flaharty Bits and Spurs Same cheek as the Marne. The longer gag allows a slower reaction than the Marne, but a quicker reaction than the Betty o...

Flaharty Bits and Spurs The Duke weighs 5.6 oz and has a 7.75 in cheek and 1:1 ratio. This bit has much quicker response due to the straighter ...

Flaharty Bits and Spurs The Duke weighs 5.6 oz and has a 7.75 in cheek and 1:1 ratio. This bit has much quicker response due to the straighter ...

Flaharty Bits and Spurs Shank:  Betty - 7.5" Mouthpiece: Rebar Snaffle Measurements are Approximate

   Maker: EG    Mouthpiece: Spade with Copper Inlay     Shank: 8"    Measurements are Approximate 

   Maker: Benny Guitron    Mouthpiece: Hooded Copper Port with Copper Roller    Shank: 8"    Measurements are Approximate 

   Maker: John Israel    Mouthpiece: Mullen    Shank: 10"    Measurements are Approximate 

   Maker: Gordy Alderson     Mouthpiece: Slow Twist Snaffle    Shank: 9" - Gag     Measurements are Approximate 

   Maker: Gordy Alderson     Mouthpiece: Slow Twist Snaffle    Shank: 8 1/4" - Gag     Measurements are Approximate 

   Maker: Gordy Alderson     Mouthpiece: Twisted Wire Snaffle    Shank: 8 1/4" - Gag     Measurements are Approximate 

   Maker: Gordy Alderson     Mouthpiece: Square Snaffle    Shank: 9" - Gag     Measurements are Approximate 

   Maker: Gordy Alderson     Mouthpiece: Chain    Shank: 10"    Measurements are Approximate 

   Maker: Gordy Alderson     Mouthpiece: Chain with Copper Rings    Shank: 10"    Measurements are Approximate 

Handmade by Jesse Hoover Slow Twist Snaffle 50/50 Gag Bit - Brown Shanks lined with Silver Dots Mouthpiece: Slow Twist Snaffle Shank: 8" gag Meas...

 Handmade Ricky Trammell Silver Mounted  Smooth 3-Piece Dogbone Mouthpiece: 3 piece smooth with dogbone Shank:  6" Approximate Measurements   

Maker: Paul Petska Mouthpiece: Washer Ported Chain Shank: 6 3/4" Silver Star Conchos Measurements are Approximate

Maker: Paul Petska Mouthpiece: Washer Ported Chain Shank: 7 3/4" Dotted Silver Conchos Measurements are Approximate

Myler Bits USA Style #219 Mouthpiece: Hinge Port with Copper Roller and Hexagon Bars Shank: 8" Measurements are Approximate

Maker: Kyle Cutrell Mounted Silver  Mouthpiece: Correction Shank: 9"  Silver Mounted ------------ Expertly handcrafted in Arizona, Kyle Cutrell...

Maker: Kyle Cutrell Mounted Silver with a Cheek Concho Mouthpiece: Solid Port with Cricket Shank: 7"  Silver Mounted ------------ Expertly hand...

   Maker: Gordy Alderson     Mouthpiece: Hackamore - Leather Nose    Cheek: 9" Silver Mounted     Measurements are Approximate 

   Maker: Gordy Alderson    Mouthpiece: Solid Port with Copper Dots    Cheek: 8"    Measurements are Approximate 

Bill Freeman BitsTM are balanced, finished to near perfection, contain only the best alloys and they are 100% US made. Mouth Piece: Correction wit...

Maker: Kerry Kelley Bits and Spurs Mouthpiece: 33 - Square Port with a Cricket Shank:  #65 - 7" Purchase: 2" Measurements are Approximate

   Maker: Roy    Mouthpiece: C-Port    Cheek: 8 1/4"    Measurements are Approximate 

   Maker: Roy    Mouthpiece: Grazing    Cheek: 8 1/4"    Measurements are Approximate 

   Maker: Barry Guillory    Mouthpiece: Copper Port    Cheek: 10"    Measurements are Approximate 

   Maker: Jason Sinclair    Mouthpiece: Square Port    Cheek: 8 3/4"    Measurements are Approximate 

   Maker: Daryl Davis    Mouthpiece: Flat Port Correction    Cheek: 7"    Measurements are Approximate 

   Maker: Morgan    Mouthpiece: Correction with Copper Inlay    Cheek: 8"    Measurements are Approximate 

   Maker: Stamped "GA"    Mouthpiece: Solid Port    Cheek: 7 1/2"    Measurements are Approximate 

   Maker: Gordy Alderson     Mouthpiece: Solid Port with Copper Dots    Cheek: 8 1/2"    Measurements are Approximate 

   Maker: Gordy Alderson     Mouthpiece: Solid Port with Copper Dots    Cheek: 8"    Measurements are Approximate 

   Maker: Gordy Alderson     Mouthpiece: Square Snaffle    Cheek: 9 3/4" - Gag     Measurements are Approximate 

   Maker: Gordy Alderson     Mouthpiece: Twisted Wire Copper Snaffle     Shank: 7" - Silver Mounted Oak Leaf Motif    Measurements are Approxima...

   Maker: Gordy Alderson     Mouthpiece: Twisted Wire Copper Snaffle     Shank: 8"    Measurements are Approximate 

   Maker: Gordy Alderson     Mouthpiece: Billy Allen    Shank: 8"    Measurements are Approximate 

   Maker: Gordy Alderson     Mouthpiece: Chain with Copper Rings    Shank: 10 1/2"    Measurements are Approximate 

Flaharty Bits and Spurs Cheek: O-Ring  Mouthpiece: Slow Twist Billy Allen The O-Ring weighs 5.6 oz. with a 3 in diameter. Classic design that ever...

Flaharty Bits and Spurs Cheek: O-Ring  Mouthpiece: Smooth Billy Allen The O-Ring weighs 5.6 oz. with a 3 in diameter. Classic design that every ho...

Flaharty Bits and Spurs Cheek: O-Ring  Mouthpiece: 3 piece Copper Bars with dogbone and copper roller The O-Ring weighs 5.6 oz. with a 3 in diamet...

  Maker: Flaharty Bits & Spurs Shank: Banana - 9" Mouthpiece: 4-Piece The Banana Gag weighing at 10.4 oz and a 9 in. cheek. The Banana dem...